Call 08045352721 64% Response Rate

our range

Quadcopter and Accessories

Our product range includes a wide range of kk2.1.5 - mini flight controller board, apm/pixhawk power module v6.0 output bec 3a xt60 plug 28v 90a, openpilot cc3d flight controller straight pin, lipo battery, a2212 brushless motor bldc for quadcopter - 1000, 1400, 1800, 2200 kv and flysky ct6b 2.4ghz 6ch transmitter with fs-r6b receiver.
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
  • A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV
A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV

A2212 Brushless Motor BLDC For Quadcopter - 1000, 1400, 1800, 2200 KV

Rs 650  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Voltage<100 V
Power Source12V
Model Name/NumberA2212 1000 KV
BrandSEES
Speed<2000 RPM
Motor TypeBLDC
TypeExternally Excited
Torque<0.20 mNm
AVAILABLE  MODELS ARE
Brushless Motor A2212 1000KV
Brushless Motor A2212 1400KV
Brushless Motor A2212 1800KV
Brushless Motor A2212 2200KV

QUICK OVERVIEW
  1. Motor KV: 1000
  2. Current Capacity: 12A/60S
  3. LiPO Batteries: 2S-3S
  4. Max. Efficiency Current: 4-10A
  5. Shaft Diameter: 3.17 mm
  6. Prop Adapter is quality tested before shipping to customers.

This is the cheapest ever brushless motor for drones. This motor is recommended to the newbie drone enthusiast and the wise pilots who are not willing to ruin the motors at the test stages.

Even when they are available at a price everyone can afford, their shocking performance is what makes everyone like them (except A2212, at this price no Brushless Motor in the Market will give you the thrust around 700gm in fly). The low price of this motor is recognized with its low-quality bearings and magnets. This motor produces noise and vibration. Also, they become warm while operating at high speed. But all these shortfalls are negligible and doesn’t affect the performance of the motor.

We import this A2212 1000 KV BLDC Motors from China. Our quality control team ensures the quality of prop-adapter by randomly selecting motors from each batch before setting them on sell.

The A2212 1000 Kv BLDC Motor for Drone equips shaft of 3.7mm. This Motor is equipped with the solid metal case which makes it reliable and durable in the crash. This A2212 1000 KV BLDC Motor comes with open wire end for your customize connections.

Many of our customers use this 1000KV Brushless motor on a Q450 Quadcopter Frame with SimonK 30A ESC and 1045 Propeller.

 

We are selling the following variations of this 1000KV Brushless Motor for Drone,
A2212 1000Kv Brushless Motor (Soldered Connector)
A2212 1000KV Brushless Motor + SimonK 30A ESC
A2212 1000Kv Brushless Motor + SimonK 30A ESC + 1045 Propeller
Set of 4 A2212 1000KV Brushless Motor + SimonK 30A ESC + 1045 Propeller

Other useful links
A2212
Brushless Motors for Drones
Q450 Quadcopter Frame
SimonK 30A ESC
1045 Propeller

TIP: “This motor is bi-directional which means it can rotate in CW or CCW direction by swapping the polarity of input supply.”

 

Features :
  1. The steel design is capable of withstanding competitional conditions.
  2. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames.
  3. Compact size.
  4. Offers great performance and value for money.


Additional Information:

  • Item Code: SEES-3160
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
  • Brushless Motor DYS 1100KV
Brushless Motor DYS 1100KV

Brushless Motor DYS 1100KV

Rs 1,350  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Usage/ApplicationDrone
Voltage220 V AC
Current1 A
Phase3
Casing MaterialBLDC
Size/DimensionBRUSHLESS MOTOR DYS 1100KV
Mounting TypeScrew Mount

AVAILABLE MODELS ARE 

BRUSHLESS MOTOR DYS 1100KV
BRUSHLESS MOTOR DYS 1400KV
BRUSHLESS MOTOR DYS 1800KV



DYS Brushless DC Motor, 1800kV D2826 is an outrunner brushless motor with KV rating of 1800 manufactured by DongYang Smart Technology Co.,Ltd (DYS). DYS is a well renowned company among flying hobbyists.

This motor is reliable and durable. An ESC of 40A is recommended to be used for speed  control. The motor can take a LiPo cell range of 2s to 3s. The set includes a motor mount, propeller nut and mounting bolts.



Additional Information:

  • Item Code: SEES-3164
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
KK2.1.5 - Mini Flight Controller Board

KK2.1.5 - Mini Flight Controller Board

Rs 1,700  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Speed At Rated LoadKK2.1.5 - Mini Flight Controller Board
VoltageKK2.1.5 - Mini Flight Controller Board
PressureKK2.1.5 - Mini Flight Controller Board
Rated LoadKK2.1.5 - Mini Flight Controller Board
BrandSEES
Country of OriginMade in India
Material Glass Fiber
Usage/Application Outdoor
Application Aerial robotics
Size 36 x 36 x 11.5 mm ( mounting holes 30.5 x 30.5 mm )
Weight 8.6
Input voltage 4.8 to 6.0 v
Lcd size 24 x 18 mm

The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don't let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

 

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

Request
Callback


Additional Information:

  • Item Code: SEES-60102
  • Production Capacity: 1000 NOS
  • Delivery Time: 2-3 DAYS
  • Packaging Details: CARTOON BOXES

View Complete details

get quoterequest a call back
Ardupilot APM 2.8 Flight Controller

Ardupilot APM 2.8 Flight Controller

Rs 2,800  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Speed At Rated LoadArdupilot APM 2.8 Flight Controller
VoltageArdupilot APM 2.8 Flight Controller
PressureHigh Pressure
Rated LoadArdupilot APM 2.8 Flight Controller
Brandsees
Country of OriginMade in India
Material Plastic
Model Name/Number QP54
Voltage 16V -20 V
Frequency 20-50 kHz
Maximum current rating 20-30 A
Diameter 22mm

Ardupilot Mega (APM) is a professional quality IMU autopilot that is based on the Arduino Mega platform. This autopilot can control fixed-wing aircraft, multi-rotor helicopters, as well as traditional helicopters. It is a full autopilot capable for autonomous stabilisation, way-point based navigation and two way telemetry with Xbee wireless modules. Supporting 8 RC channels with 4 serial ports.

Additional Information:

  • Item Code: SEES-6100
  • Production Capacity: 1000 nos
  • Delivery Time: 2-3 DAYS
  • Packaging Details: CARTOON BOXES

View Complete details

get quoterequest a call back
OpenPilot CC3D Flight Controller Straight Pin

OpenPilot CC3D Flight Controller Straight Pin

Rs 1,700  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Speed At Rated LoadOpenPilot CC3D Flight Controller Straight Pin
VoltageOpenPilot CC3D Flight Controller Straight Pin
PressureOpenPilot CC3D Flight Controller Straight Pin
Rated LoadOpenPilot CC3D Flight Controller Straight Pin
Stroke LengthOpenPilot CC3D Flight Controller Straight Pin
Duty CycleOpenPilot CC3D Flight Controller Straight Pin
Retracted LengthOpenPilot CC3D Flight Controller Straight Pin
BrandSEES
Part Number QP51
Model Name/Number CC3D
Device Core STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
Material Plastic
Usage/Application Outdoor
Brand OpenPilot

The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. CC3D CopterControl Hardware

Features:

Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac and Linux.
Direct high speed USB support with no drivers required, a truly plug and play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.

Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.
 
Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.
 
The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
 
Sensors and Components
3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz
Installation settings for CC3D flight controller,click here.
 
Package included:

  • 1 x CC3D Flight Controller
  • 1 x Wire connector
  • 1 x flight controller case


Additional Information:

  • Item Code: SEES-6108
  • Production Capacity: 1000 NOS
  • Delivery Time: 2-3 DAYS
  • Packaging Details: CARTOON BOXES

View Complete details

get quoterequest a call back
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
  • DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)
DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)

DYS SimonK 30A Brushless Speed Controller ESC for Drone (Quadcopter)

Rs 950  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Usage/ApplicationIndustrial
TypeDRONE
Voltage12V
InputVoltage
DesignDYS SimonK 30A Brushless Speed Controller ESC For Drone (Quadcopter)
FeaturesDYS SimonK 30A Brushless Speed Controller ESC For Drone (Quadcopter)
Analog OutputNo
QUICK OVERVIEW
  1. Model: DYS 30A Brushless ESC.
  2. Constant Current: 30 A.
  3. Burst Current: 40A for 10 sec.
  4. BEC: 5V / 2A.
  5. Suitable Batteries: 2~4S.
  6. Color: Black/ Blue.

This is a DYS SimonK 30A Brushless Speed Controller ESC For Drone, Multi-copter Brushless Motor Speed Controller with a running current of 30A. The power input uses extreme low output resistance greatly enhance the power stability and has the protective effect on the battery. Separately voltage regulator IC for the microprocessor. providing the good anti-jamming capability.

Using SimonK’s a dedicated multi-copter program tgy_debug; and the master chip with high stability crystal oscillator, making the motor control to more precise.

Connections:

 

Warning: In case the BLDC ESC is connected directly to the remote control receiver; never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control; it may result in full throttle applied to the motor and it will rotate at full speed.

DYS SimonK 30A Brushless Speed Controller ESC Wiring (Other products not included in this package):

 

 

Features:
  1. Drive tube and high-power Mos, and Mos tube plus a separate heat sink; Extreme low output resistance of the PCB(printed circuit board), super current endurance.
  2. The power input uses extreme low output resistance greatly enhance the power stability and has the protective effect on the battery.
  3. Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start the motor immediately; to avoid personal injury.
  4. Separately voltage regulator IC for the microprocessor; providing the good anti-jamming capability.
  5. Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
  6. Using SimonK a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator; making the motor control to more precise.
Package Includes:

1 x DYS SimonK 30A Brushless Speed Controller ESC For Drone (Quadcopter).



Additional Information:

  • Item Code: SEES-3222
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
Coreless Motor with propeller

Coreless Motor with propeller

Rs 95  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Country of OriginMade in India
Usage/Application Outdoor
Color Silver
Height Depending on Variant - 16mm, 20mm
Diameter Depending on Variant - 7mm, 8mm, 10mm
Shaft Diameter 1.0mm
Cable Length 60mm

Motor Description:
Motor Weight: about 5g
Operating Voltage range: 3v to 3.7v DC
Rated Speed - 39000 RPM 
Dimensions Available - 
1. 7x16mm 
2. 7x20mm
3. 8.5x20mm
4. 10x20mm

Additional Information:

  • Item Code: SEES-6106
  • Production Capacity: 1000 NOS
  • Delivery Time: 2-3 DAYS
  • Packaging Details: CARTOON BOXES

View Complete details

get quoterequest a call back
IMAX B6-AC Lipo NiMH Battery Charger

IMAX B6-AC Lipo NiMH Battery Charger

Rs 3,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Country of OriginMade in India
NAMEIMAX B6-AC Lipo NiMH Battery Charger
Battery Voltage2 ~ 20V
AC Input Voltage100 ~ 240V - 12V DC
InputMax Charge50WMax Discharge 5WCharge
Current Range0.1 ~ 6.0ADischarge
Discharge Current Range0.1 ~ 1.0ANi-MH / NiCd Cells 1 ~ 15Li-ion / LiPoly Cells 1 ~ 6Pb
Weight632g
Dimensions135 x 144 x 36mm

The latest version of the popular IMAX B6AC has arrived and now boasts some unique new features. The latest V2 Model now offers PC connectivity which allows the user to control the charger via your home computer and upgrade the firmware as and when necessary.The B6AC V2 now gives you the ability to adjust the terminal voltage, which makes the charger the perfect charging solution for heavy duty batteries.
The B6AC V2 can also be used as a Lithium battery meter / internal resistance meter and boasts additional functions which include, automatic charging current limit, capacity limit and processing time limit, making the B6AC V2 one of the safest chargers available today.
Features:• PC connectivity• Microprocessor controlled• Delta-peak sensitivity• Individual cell balancing• Li-ion, LiPo and LiFe capable• Ni-Cd and NiMH capable• Large range of charge currents and automatic charge current limit• Store function, allows safe storage current• Time limit function• Input voltage monitoring (Protects car batteries at the field)• Data storage (5 pack memory)• Battery break in and cycling.• Terminal voltage adjustment for heavy duty batteries
Package Includes: 1 x IMAX B6AC V2 Charger1 x DC Jack plug to crocodile clips1 x male
T connector charge lead to 4mm banana plugs 1 x XT60 charge lead 1 x JST charge lead1 x Crocodile clip charge lead1 x Futaba style charge lead1 x Mains power lead (US type)Request
Callback

Additional Information:

  • Item Code: SEES-6105
  • Production Capacity: 1000 NOS
  • Delivery Time: 2-3 DAYS
  • Packaging Details: CARTOON BOXES

View Complete details

get quoterequest a call back
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8

Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8

Rs 2,200  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Model Name/NumberUblox NEO 7M
Receiver Type56 Channels, Galileo E1B/C1, GPS L1C/A, QZSS L1C/A, SBAS L1C/A
Receiver FrequencyL1 [1575.42MHz]
Supply Voltage (V)3.5 to 5V
Main ChipU-BLOX NEO-7M
Navigation Update Rate5Hz

Ublox Neo 7M GPS module that includes an HMC5883L digital compass.  The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz.  This GPS module also comes with a molded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.

This Ublox Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.   This Ublox Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an I²C EEPROM to store the configuration settings.  Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This GPS module includes two cables, a 6pin connector for the GPS module and a 4 pin connector for the i2c compass. Robu.in

Note:

  • APM 2.5 and APM 2.0 have an internal compass (unlike APM 2.6) which must be disabled by cutting a trace before you can connect the 3DR UBlox GPS + Compass module (the video here shows how).
  • Other than disabling the internal compass, connecting the UBlox is the same for APM2.0/APM2.5 as for APM2.6.
 Features :
  1. Locate performance
  2. These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
  3. Super Bright LED
  4. Backplane with Standard Mk style mounting holes 45mm X 45mm
  5. 38400 bps (Default) Changed to 115200bps!
  6. Output GGA, GSA and RMC frames
  7. 1Hz (Default) Changed to 5Hz!
  8. Permanent Configuration Retention
  9. compass on board
  10. 6 pin connector for EZ connect to MEGA BLACK
  11. 4 pin connector for only GPS use
  12. 4 pin connector for compass only use
  13. Can use both 4 pin at once.
Request
Callback

Additional Information:

  • Production Capacity: 1000 NOS
  • Delivery Time: 2-3 DAYS
  • Packaging Details: CARTOON BOXES

View Complete details

get quoterequest a call back
  • Q450 & Q550 Quadcopter Frame
  • Q450 & Q550 Quadcopter Frame
  • Q450 & Q550 Quadcopter Frame
  • Q450 & Q550 Quadcopter Frame
  • Q450 & Q550 Quadcopter Frame
Q450 & Q550 Quadcopter Frame

Q450 & Q550 Quadcopter Frame

Rs 1,350  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Model Name/NumberQ450 & Q550 Quadcopter Frame
ModesQ450 & Q550 Quadcopter Frame
Camera TechniqueQ450 & Q550 Quadcopter Frame
PixelQ450 & Q550 Quadcopter Frame
PowerQ450 & Q550 Quadcopter Frame
MaterialPlastic
DimensionQ450 & Q550 Quadcopter Frame
Usage/ApplicationNew
QUICK OVERVIEW
  1. Wheelbase: 450mm.
  2. Material: Glass Fiber + Polyamide-Nylon.
  3. Moter Mounting Hole Dia.: 3 mm.
  4. Arm Size: 220 x 40 (LxW) mm.
  5. Arm mounting holes (on frame): 3 mm.
  6. Arm mounting holes (on arm): 2 mm.

 

This Q450 Quadcopter Frame is made from Glass Fiber which makes it tough and durable. They have the arms of ultra-durable Polyamide Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.

The arms of the frame are colored as 2 red and 2 white which can guide you to fly in the right direction.

They are strong, light, and have a sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESC‘s to the Quadcopter. So, making the Quadcopter build fast and easy. So, it avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat. The Q450 Quadcopter Frame is highly flexible frame during mounting of various components like flight controller, battery etc.

The frame has the wheelbase of 450mm and weighs around 320gm. It features mounting tabs at the front and rear end on the bottom plate of the main frame for mounting cameras and other accessories.

 

It comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the main frame is done within few minutes.  Also, it requires one size of bolt for the overall build and thus a unique one size hex wrench which makes hardware mounting very convenient. This feature of Q450 Quadcopter Frame makes them so easy to assemble and disassemble.

Much lighter weight, higher strength Aerodynamic structure of this Q450 frame featuring PA66 arms with glass fiber integrated frame make it the first choice of our customer.

We are offering a full line of multi-rotor accessories,
Multirotor Motors
ESC’s (Electronic Speed Controller)
Orange Li-PO Batteries
Flight Controllers
FPV Cameras
Gimbals
Propellers
Remotes

Or explore more variety of multirotor accessories by clicking below
Multirotors

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Note: The dimensions and weight may have  ±2% error.

Note: This frame is available in two (Red-White and Red-Black) color-combination, it will be ship randomly.

Features :
  1. Made by advanced engineering material, super strong & smooth
  2. Easy to assemble and disassemble.
  3. The frame is tough and durable.
  4. The main glass fiber frame has good strength.
  5. The arm equips support ridges for better and faster forward flight.
  6. Features pre-threaded brass sleeves.
  7. Large mounting tabs for camera mounting.
  8. In-built power distribution board.
  9. Arm mounting holes: 3 mm.
Package Includes : 

1 x Q450 quadcopter Frame(Top and Bottom) with Integrated PCB.

4 x Q450 arms (Red+White).

2 x Accessories set.

Recommendation (NOT Included ) :
  1. Propeller: “1045″ 
  2. Battery: 3S  LiPo (1800 – 3600mAh)
  3. ESC: 15A – 40A.
  4. Motor: 800-1100 KV (brushless dc motor)


Additional Information:

  • Item Code: SEES-3514
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
  • IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
  • IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
  • IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
  • IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
  • IMAX B3 AC Compact Balance Charger for 2S-3S LiPo
IMAX B3 AC Compact Balance Charger for 2S-3S LiPo

IMAX B3 AC Compact Balance Charger for 2S-3S LiPo

Rs 650  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

BrandIMAX B3 AC Compact Balance Charger for 2S-3S LiPo
Part NumberIMAX B3 AC Compact Balance Charger for 2S-3S LiPo
Output VoltageIMAX B3 AC Compact Balance Charger for 2S-3S LiPo
Number of Batteries ChargedIMAX B3 AC Compact Balance Charger for 2S-3S LiPo
Charge CurrentIMAX B3 AC Compact Balance Charger for 2S-3S LiPo
Battery Type ChargedIMAX B3 AC Compact Balance Charger for 2S-3S LiPo
QUICK OVERVIEW
  1. Input: 110v or 240v A/C (50/60Hz)
  2. Cell Count: 2~3s
  3. Battery Type: LiPoly
  4. Output Current: 3 x 800mA

Here is the link for  SKYRC E3 AC 2S~3S Li-Po Battery Balance Charger (V2) (Original)

B3AC Compact Charger is a simple and compact LiPoly balance charger for 2~3s batteries. It features built-in JST-XH balance plug ports and 3 LEDs to indicate charge status. B3AC makes an ideal pocket-sized charger to keep in your field box.

Package Includes:

1 x IMAX B3 AC Compact Balance Charger for 2S-3S LiPo



Additional Information:

  • Item Code: SEES-3353
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • 11.1V 2200mAh 3S 25C Lithium Polymer Battery Pack (Lipo)
  • 11.1V 2200mAh 3S 25C Lithium Polymer Battery Pack (Lipo)
  • 11.1V 2200mAh 3S 25C Lithium Polymer Battery Pack (Lipo)
11.1V 2200mAh 3S 25C Lithium Polymer Battery Pack (Lipo)

11.1V 2200mAh 3S 25C Lithium Polymer Battery Pack (Lipo)

Rs 1,400  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Model Name/Number11.1V 2200mAh 3S 25C Lithium polymer battery Pack (LiPo)
Rated Voltage11.1V 2200mAh 3S 25C Lithium polymer battery Pack (LiPo)
Battery Capacity11.1V 2200mAh 3S 25C Lithium polymer battery Pack (LiPo)
Operating Temperature Range11.1V 2200mAh 3S 25C Lithium polymer battery Pack (LiPo)
Voltage11.1V 2200mAh 3S 25C Lithium polymer battery Pack (LiPo)
BrandSEES
Battery TypeLithium-Polymer
UICK OVERVIEW
  1. Model No:  2200/3S-25C
  2. Weight : 175.0g
  3. Voltage : 11.1V
  4. Dimensions : 23x34x106(mm )
  5. Max Continuous Discharge : 30C(66.0A)
  6. Balance Plug : JST-XH
  7. Max Burst Discharge : 60C(132.0A)
  8. Discharge Plug : XT-60
  9. Charge Rate : 1-3C Recommended, 5C Max

2200mAh 3S 30C/60C Lithium polymer battery Pack (LiPo) batteries are known for performance, reliability and price. It’s no surprise to us that Orange Lithium polymer packs are the go-to pack for those in the know.  2200mAh 3S 25C Lithium polymer battery Pack (LiPo) batteries deliver the full rated capacity at a price everyone can afford.

Orange 2200mAh 3S 25C Lithium polymer battery Pack (LiPo) batteries are equipped with heavy duty discharge leads to minimize resistance and sustain high current loads.batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Lithium Polymer batteries packs are assembled using IR matched cells.

You won’t find a better deal than this in Lithium Polymer batteries anywhere!

Note: The battery dimensions and weight may have  ±2% error.

Safety Precautions :
  1. Avoid over-charging or over-discharging the batteries.
  2. Do n0t put it beside the high-temperature condition.
  3. Don’t throw it into the fire or Water
Features :
  1. Product Type: Lithium Polymer Battery Pack
  2. The  LiPo battery has matched resistance.
  3. Good Temperature Control.
  4. Minimum weight in Class
Package Includes :

1 x 2200mAh 3S 25C Lithium polymer battery Pack (LiPo)



Additional Information:

  • Item Code: SEES-4000
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • Bullet Connector
  • Bullet Connector
  • Bullet Connector
  • Bullet Connector
Bullet Connector

Bullet Connector

Rs 35  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

BrandSEES
Part NumberBullet Connector
Connector GenderBullet Connector
Contact MaterialBullet Connector
Maximum Operating TemperatureBullet Connector
Termination MethodBullet Connector
Current RatingBullet Connector
Mounting TypeBullet Connector
This 8mm Gold Plated Bullet Connector Male-Female Pair has the all-new design of the new 1 male head shape, increase the contact surface area, can resistant than regular 4.0mm banana plug more current. The raw materials used are non-toxic lead-free, comply with ROHS environmental standard.

What makes these gold bullet connectors different than the other expensive connectors seen on the market? These connectors are plated with a heavy gold coating. Twice the thickness of most of the other connectors being sold elsewhere. This increases the cost BUT makes the gold finish last longer. Allowing your system to run at a higher efficiency.

The plug comes with 24K gold plating, the thickness reached 0.05 M. The thickness of the coating plays the role of protecting the plug to prevent oxidation and prolong the service life.Features:
  1. Good conductivity, stability, temperature, continuous discharge.
  2. New tail wire slot, convenient welding line.
  3. Metal material: Copper.
  4. Applicable products: for the motor, electrical and other products.


Additional Information:

  • Item Code: SEES-3168
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
  • FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver

Rs 2,950  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

BrandSEES
Model Name/NumberFlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
ModesFlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
Camera TechniqueFlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
PixelFlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
PowerFlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver
MaterialPlastic
DimensionFlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multicopters that require the 6ch operation.

This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a computer.

 

Features : 

  1. Super active and passive anti-jamming capabilities.
  2. Very low power consumption.
  3. High receiving sensitivity.
  4. 8 model memory, digital control.
  5. Can be programmed by PC with included software.
  6. Full range 2.4GHz 6-channel radio.
  7. 4-Model
  8. 4 Types (Airplane, Heli90, Heli120, Heli140).
  9. Integrated
  10. Contrast Adjustment.
  11. Throttle cut.
  12. Computer
  13. USB Socket.
  14. Use a linear spread of fine paragraph by excess antenna.
  15. It covers the entire band width of he antenna bandwidth range.
  16. High quality and stability.

Package Includes :

1 x FS-CT6B Transmitter

1 x FS-r6B Receiver

1 x USB Interface Cable

1 x Software CD

1 x Receiver Binding Cable

1 x User Manual



Additional Information:

  • Item Code: SEES-3272
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
  • FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver

FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver

Rs 4,100  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

BrandSEES
Model Name/NumberFlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
ModesFlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
Camera TechniqueFlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
PixelFlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
PowerFlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
MaterialPlastic
DimensionFlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
QUICK OVERVIEW
  1. i-Bus Interface: Yes.
  2. Data Acquisition Interface: Yes.
  3. Weight:392 gm.
  4. Power: 6V (1.5V AA*4).
  5. Antenna Length: 26mm * 2 (dual antenna).
  6. Transmitting Power: ≤ 20dBm.
  7. RF Receiver Sensitivity: -105dbm.

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. This is a great entry-level radio for those just starting in the field of drones flying due to the ease of use of this product and an impressive list of features for a first-time radio. FlySky FS-i6 2.4G 6CH PPM RC Transmitter is a 6-channel telemetry 2.4GHz transmitter that uses the reliable Automatic Hopping Digital System (AFHDS) and includes such features as digital trims, backlit LCD screen, and simple programming.

On top of this, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400g and so won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch as well as two adjustable knobs for flight modes/ multiple flap positions.

You also get the new FS-iA6B receiver with this kit. This is a compact 6-channel receiver with a range exceeding 500m and it comes with a dual antenna for excellent reception and interference rejection capabilities.  Each transmitter has a unique ID and so when binding, the receiver remembers this ID and accepts data from that transmitter only. This avoids picking up other transmitter signals and dramatically decreases inference and increases safety.

 

Specifications and Features :Features:
  1. Entry-level 6 channel 2.4GHz radio with telemetry capability.
  2. Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches.
  3. Easy to use Programming & Navigation Buttons.
  4. Supports Heli/Standard Wing/Elevon/V-Tail.
  5. 20 Model Memory.
  6. 8 Character Model Name.
  7. Trainer and charging ports.
  8. The backlit LCD screen displays real-time transmitter and receiver voltage.
  9. 4 Stick Mode Selectable.
  10. Mode 2.
  11. It comes with a receiver.
FS-i6 Transmitter Specifications :
  1. Model Type: Glider/Heli/Airplane
  2. Band: 142
  3. 2.4ghz System: AFHDS 2A and AFHDS
  4. Code Type: GFSK
  5. DSC Port: PS2;
  6. Output:PPM
  7. Charger Port: No
  8. ANT length: 26mm*2(dual antenna)
  9. On-line update: Yes
  10. Certificate: CE0678,FCC
  11. Model Memories: 20
  12. Channel Order: Aileron-CH1, Elevator-CH2, Throttle-CH3, Rudder-CH4, Ch 5 & 6 open to assignment to other functions.
FS-iA6B Receiver Specifications :
  1. Channel: 6.
  2. Frequency Range: 2.4055–2.475 GHz.
  3. Band Width Number: 140
  4. Transmitting Power: ≤ 20 dBm.
  5. RF Receiver Sensitivity: 105 dBm.
  6. 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system.
  7. Encoding: GFSK.
  8. Antenna Length : 2 x 26 mm (dual antenna).
  9. Input Power : 4.0 – 8.4 VDC (2A).
  10. Dimension : 47 x 26.2 x 15 mm
  11. Weight : 14.9 gm.
  12. Data Acquisition Interface: Yes.
  13. Model Type : Airplane / Glider / Helicopter.
  14. Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G.
Package Includes :

1 x FlySky FS-i6 2.4G 6CH PPM RC Transmitter.
1 x FS-iA6B receiver
1x User Manual BookLet.



Additional Information:

  • Item Code: SEES-3273
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • HD Propellers 1045 (10X4.5) Carbon Nylon
  • HD Propellers 1045 (10X4.5) Carbon Nylon
  • HD Propellers 1045 (10X4.5) Carbon Nylon
  • HD Propellers 1045 (10X4.5) Carbon Nylon
HD Propellers 1045 (10X4.5) Carbon Nylon

HD Propellers 1045 (10X4.5) Carbon Nylon

Rs 120  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Model Name/NumberHD Propellers 1045 (10X4.5) Carbon Nylon
ModesHD Propellers 1045 (10X4.5) Carbon Nylon
DimensionHD Propellers 1045 (10X4.5) Carbon Nylon
Camera TechniqueHD Propellers 1045 (10X4.5) Carbon Nylon
MaterialPlastic
Usage/ApplicationINDUSTRIAL
PixelHD Propellers 1045 (10X4.5) Carbon Nylon
WeightHD Propellers 1045 (10X4.5) Carbon Nylon
QUICK OVERVIEW
  1. Length: 10″.
  2. Pitch: 4.5″.
  3. Weight: 28 gm.
  4. Shaft Diameter: 9.5 mm.
  5. Total Length: 10 inch / 250 mm
  6. Material: Carbon Nylon

The HD Propellers 1045(10X4.5) Carbon Nylon DJI Black is the high-quality propellers specially designed for multi-copters.

These Propellers are light in weight and high strength propeller has a 15° angle design at the end of the propeller to avoid whirlpool while the multi-copter is flying. They are useful in drones as well as in multi-copters.

The Propellers is of high endurance and flexibility for great impact. The Orange propellers help to improve the air-powered efficiency and aerofoil stability.

Note: 

The Propeller dimensions and weight may have  ±2% error.

We at  passionately deal in this Multicopter/Drone area to encourage and help many DIY makers by supplying every essential product to build and enrich Multicopters/Drones. The Orange is a brand by Robu.in which is aimed at providing quality products to our customers. Do not forget to check more Orange propellers by clicking below,

 Propellers and Accessories

For more accessories including BLDC Motors, Multirotor Frames etc check out our,

Multirotors Category

Features :
  1. Durable plastic construction provides both lightness and rigidity.
  2. The  HD Propellers 1045(10X4.5) Carbon Nylon DJI Black comes Epoxy resin cover.
  3. Very strong and lightweight.
  4. Quick to release, quick to attach.
  5. New design propellers, with greater aerodynamic efficiency, good lifting capacity.


Additional Information:

  • Item Code: SEES-3525
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame
  • Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame
  • Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame
  • Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame
Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame

Q250 Quadcopter Strong Carbon Fiber FPV Racing Frame

Rs 1,350  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

BrandSEES
MaterialCarbon Fiber
Model Name/NumberQ250 Quadcopter Strong Carbon Fiber FPV Racing Frame
ModesQ250 Quadcopter Strong Carbon Fiber FPV Racing Frame
DimensionQ250 Quadcopter Strong Carbon Fiber FPV Racing Frame
Usage/ApplicationOutdoor
ColorBlack
FeaturesQ250 Quadcopter Strong Carbon Fiber FPV Racing Frame
QUICK OVERVIEW
  1. Wheelbase: 250mm
  2. Material: Full Carbon Fiber
  3. Weight: 160 gm
  4. The arm equips dampers for the safe landing.
  5. The arm has multiple motor mounting holes.
  6. Equips vibration-free mounting bracket for FPV camera.

The Q250 is a mini-size quadcopter frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. This frame is known for its toughness and durability.

This Q250 carbon fiber frame is available in 2 different choices 

>> Q250 Super Stong Carbon Fiber Quadcopter Frame for FPV Racing
>> Q250 Carbon Fiber Quadcopter Frame for FPV Racing

The difference between them is the quality of material used in manufacturing, hence the Q250 with Super Stong Carbon Fiber dominates the Q250 with Conventional Carbon FIber. So the Q250 Super Stong Carbon Fiber Quadcopter Frame for FPV Racing costs more.

This Q250 Quadcopter Frame is made from Carbon Fiber which makes it tough and durable. The carbon fiber arms of thickness 3mm which ensure no more arm breakage at the motor mounts on a hard landing. The arms have dampers at the end, which protects motors during the crash.

 

The frame has a wheelbase of 250mm and weighs around 160gm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 37mm board cams as well as cams in cases with mounting bracket.

It’s longer top and bottom plate allow easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

The Q250 Carbon Fiber Quadcopter Frame equips anodized alloy spacers. The arms of this carbon fiber frame feature multiple motor mounting holes so as to fit a variety of motors. It equips a vibration-free mounting bracket for housing the camera on the frame.

We are offering a full line of multi-rotor accessories,
Multirotor Motors
ESC’s (Electronic Speed Controller)
Orange Li-PO Batteries
Flight Controllers
FPV Cameras
Gimbals
Propellers
Remotes

Or explore more variety of multirotor accessories by clicking below
Multirotors

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Note: The dimensions and weight may have  ±2% error.

Features :
  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. The arm equips dampers for the safe landing.
  5. The arm has multiple motor mounting holes.
  6. Equips vibration-free mounting bracket for FPV camera.
Package Includes : 

3 x Quadcopter Frame Plates(top, bottom, and center).
4 x Strong carbon fiber arm.
8 x Aluminum column.
4 x Rubber Shock absorbing Ring.
1 x Camera lens holder.
1 x Carbon fiber spacer mountings.
Set of Screws and Nuts



Additional Information:

  • Item Code: SEES-3271
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES