Sri Electronics & Embedded Solutions

1. Model: LCD1602
2. Character Color: Black
3. Backlight: Yellow
4. Supply voltage: 5V
5. Dimensions: 80 x 36 x 10 (LxWxH) mm.

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only little to display, the LCD1602 Parallel LCD Display is a quite good solution.

This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast black text upon a yellow background/backlight.

This is great yellow backlight LCD display. It is fantastic for Arduino based project. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.

The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

One thing to consider is you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily there exists an I2C adapter that you can solder right onto the pins of the display. So all you need to connect are the I2C pins, which shows a good library and little of coding. We have the same LCD module with pre-assembled I2C adapter, click on the name below to check it

LCD1602 Parallel LCD Display with IIC/I2C interface

For more displays click below,

LED/LCD Display

1. 16 characters wide, 2 rows
2. Black text on the yellow background
3. Single LED backlight included can be dimmed easily with a resistor or PWM.
4. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)

1 x LCD1602 Parallel LCD Display Yellow Backlight

Additional Information:

• Item Code: SEES-3204
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

This is an industry standard HD44780 based controlled 4 lines x 20 characters LCD display with WHITE characters on BLUE background and backlight. It is a parallel interface so you will need 7 GPIO pins for 4-bit mode or 11 GPIO pins for 8-bit mode to interface to this LCD screen

• Wide viewing angle and high contrast
• Industry standard HD44780 equivalent LCD controller built-in
• +5V DC LED backlight
• Supported 4 or 8 bit parallel interface
• Display 4-line X 20-character
• 20X4 LCD i2c

Additional Information:

• Item Code: SEES-1609
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion  2.8″HMI LCD Touch Display includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time on application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.

It’s easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.

Powerful 2.8” HMI, which is member of Nextion family. Features include: a 2.8″ TFT 320×240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.

1. 320 x 240 Resolution
2. RGB 65K true to life colours
3. TFT screen with integrated resistive touch panel
4. 4 pin TTL serial interface
5. 4M Flash memory for User Application Code and Data
6. Onboard micro-SD card slot for firmware upgradation
7. Visual Area: 57.6mm(L)×43.2mm(W)
8. Adjustable Brightness: 0~180 nit, the interval of adjustment is 1%
9. 5V65mA power consumption
10. Compatible with Raspberry Pi A+, B+, Pi 2, Pi 3, Arduino.
11. Certificates: CE/EMC, RoHS (certificates)

1 x Nextion 2.8″HMI LCD Touch Display

1× power supply test board

1× 4-pin grove cable

Additional Information:

• Item Code: SEES-3032
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Cartoon Boxes

Nextion  2.4″ TFT Intelligent ManMachine Interface HMI kernel LCD Touch Display is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.

It’s easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.

1. 320 x 240 Resolution
2. Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2
3. RGB 65K true to life colors
4. TFT Screen with integrated 4-wire Resistive Touch Panel
5. Easy 4 pin interface to any TTL Serial Host
6. 4M Flash memory for User Application Code and Data
7. Onboard micro-SD card for firmware upgrade
8. Visual Area:36.72mm(L)×48.96mm(W)
9. Adjustable Brightness:0~180 nit, the interval of adjustment is 1%
10. 5V90mA power consumption
11. Generic using for all Arduino or Raspberry Pi project
12. CE/EMC, RoHS certified (certificates)

Please visit our wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.

For technical support, please open a ticket on Itead Support System.

1 x Nextion 2.4″ TFT Intelligent LCD Touch Display

1 x Connecting Cable

1 x Power Supply Test Board

Additional Information:

• Item Code: SEES-3029
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Cartoon Boxes

Additional Information:

• Item Code: SEES-1641
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Additional Information:

• Item Code: SEES-1639
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Additional Information:

• Item Code: SEES-1640
• Port of Dispatch: Coimbatore
• Production Capacity: 1000
• Delivery Time: 1-2 DAYS
• Packaging Details: Carton Boxes

• Single Color :Rs:3000/Sq-feet
• Multi color :Rs:5000/Sq-feet

Additional Information:

• Item Code: SEES-1624
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 DAYS
• Packaging Details: Carton Boxes

• 2x0.5 ft - Rs:900.00
• 3x0.5 ft - Rs:1300.00
• 4x0.5 ft - Rs:1800.00
• 5x0.5 ft - Rs:2000.00
• 3x1 ft - Rs:1900.00
• 4x1ft - Rs:2250.00

Additional Information:

• Port of Dispatch: Coimbatore
• Production Capacity: 1000
• Delivery Time: 2-3 days

P10 - Outdoor/ Indoor LED Display Panel - 32x16 - High Brightness Red - 5V - Dot Matrix Display

P10 32x16 (Total 512 LEDs) LED Display module is the easiest way to put together any size of Outdoor or Indoor LED display sign board. This panel is having total 512 high brightness red led's mounted on a high quality plastic housing designed for best display results. Any number of such panels can be combined in different fashions in order to realize LED sign board/ Graphics Board of any size.

• 32x16 high brightness RED LEDs
• Can be viewed easily from a distance of 12 meters in outdoor conditions
• Tough and high quality plastic frame with screw hole for mounting
• Black back ground with cap over each led for best display results
• including rear connectors)

Additional Information:

• Item Code: SEES-1625
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

P10 - Outdoor/ Indoor LED Display Panel - 32x16 - High Brightness Green - 5V - Dot Matrix Display

P10 32x16 (Total 512 LEDs) LED Display module is the easiest way to put together any size of Outdoor or Indoor LED display sign board. This panel is having total 512 high brightness red led's mounted on a high quality plastic housing designed for best display results. Any number of such panels can be combined in different fashions in order to realize LED sign board/ Graphics Board of any size.

• 32x16 high brightness GREEN LEDs
• Can be viewed easily from a distance of 12 meters in outdoor conditions
• Tough and high quality plastic frame with screw hole for mounting
• Black back ground with cap over each led for best display results
• including rear connectors)

Additional Information:

• Item Code: SEES-1627
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Coimbatore
• Production Capacity: 1000
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Additional Information:

• Item Code: SEES-1632
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Coimbatore
• Production Capacity: 1000
• Delivery Time: 1-2 DAYS
• Packaging Details: CARTON BOXES

Additional Information:

• Item Code: SEES-1633
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Coimbatore
• Production Capacity: 1000
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes