Sri Electronics & Embedded Solutions

GSM BASED MOTOR STARTER CONTOL - 1 PHASE AND 3 PHASE

 

         In GSM BASED MOTOR STARTER CONTOL - 1 PHASE AND 3 PHASE, the GSM Pump Controllers (Mobile Pump Starter) are specifically design to operate remote located submersible pumps and motors for benefit of farmers, agriculture people and industries where wireless pump and motor control required.Our GSM based mobile pump controller is manufactured with advanced micro controller technology and quality process. Yet these devices are affordable to customer.

 

Advantages of GSM BASED MOTOR STARTER CONTOL - 1 PHASE AND 3 PHASE

•    User can operate pump/motor from anywhere, from any distance.

•    User can operate pump via SMS as well as just Missed Call.

•    GSM Technology, Reliable operation, Worldwide Connectivity.

•    Low Cost, Quality and less maintenance and robust device.

•    Storing OWNERS 5 Mobile Nos  Through SMS.

•    SMS to Get the Status of device.

•    Missed Call To Control - Motor On and Off.

•    Message Alerts for Power UP, Motor On, Motor Off, Status.

 

Specification

•    Board working Voltage is 12V DC min 1 amps.

•    External  Antenna with Kit Included.

•    SIM card Slot Inside of the unit

SPECIFICATION:

• POWER INPUT: 12v DC-1 Amps
• RELAY: 250v 7A, 24 10A
• LIGHT INDICATION:
• FIRST LED: RED- POWER LIGHT
• SECOND LED: GREEN- MOTOR STATUS : LED ON- MOTOR ON. LED OFF- MOTOR OFF
• THIRD LED: GREEN – BLINK 2 SECONDS ONCE GSM CONNECTED TO NETWORK.

Additional Information:

• Item Code: SEES-1177
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

power failure sms alert system (single phase):

features:  Instant sms alert for single phase power fail orpower resume  Alert for multiple 5 user numbers(sms) Configurable message string for every alerts  Sms based easy configuration  Easy to install and integrate Internal battery backup

specification:

• power input: 12v dc-2 amps
• ac input: 230v ac
• light indication:
• first led: red- power light
• second led: green – if power available led will on,if power off led goes off
• third led: green - blink 2 seconds once gsm connected to network

Additional Information:

• Item Code: SEES-5076
• Production Capacity: 1000 NOS
• Delivery Time: 2-3 DAYS
• Packaging Details: CARTON BOXES

GSM BASED RELAY ON/OFF SWITCH  6 CHANNEL TO 8 CHANNEL

Remote control using a MOBILE phone from anywhere in the world!   - New Feature  - Schedule Timer Added 

                        The GSM BASED RELAY ON/OFF SWITCH 6 CHANNEL TO 8 CHANNEL  is a GSM remote control switch, it connects to the cell phone network and like a cell phone has its own cell phone number. The GSM switch is activated by Sending SMS to its cell phone number, it has 1 TO 8  independent relay switches with normally open and normally closed switch contacts, these can be programmed to switch on and Off By Sending SMS A1 B1 C1 -A0 B0 C0  .....     . SMS text message command. It can report the relay status by sending back a text message.

Applications 

                     Applications are endless and include the remote control of heating and air conditioning in holiday homes, lighting, engine pre-heaters, aviation engine heaters, irrigation systems, water well pumps, pumping stations, cabin heaters, power cycle and reboot of remote servers, routers and computers.

•    Dual band based GSM Modem.
•    Independent relays that can be programmed to switch on and OFF Using SMS.
•    secure access where it will only respond to programmed authorized telephone numbers.( upto 5 nos  ).
•    The relays can be temporarily switched on and Off by sending the GSM BASED RELAY ON/OFF SWITCH 6 CHANNEL TO 8 CHANNEL a text message command,
      a confirmation text will be returned when the relays turn on and off if required.
•    1 TO 8 relay's with normally open (N.O) and normally closed (N.C) contacts, maximum switching capacity is
     7 amps @ 230V ac per relay.

Specification

•    Operating Voltage - 12VAC/ DC 2 Amps
•    SIM card any Network -  LTE No support  - No support for JIO

SPECIFICATION :

• POWER INPUT: 12v DC-2 Amps
• RELAY: 250v 7A, 24 10A
• LIGHT INDICATION:
• FIRST LED: RED- POWER LIGHT
• SECOND LED: GREEN – BLINK 2 SECONDS ONCE GSM
• CONNECTED TO NETWORK
• RELAY ON CORRESPONDING LED WILL GLOW

Additional Information:

• Item Code: SEES-1175
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

universal timer fully digital - 6 digit

specification:

• power input: 12v dc maximum (9v recommended)
• display: 16x2 lcd
• buttons: up, down, mode, set (or) start.
• relay: 230v 6a or 24v 8a

modes cyclic timer m-1 cyclic timer m-2 off delay timer on delay timer

cyclic timer m-1

timer runs on and off time continuously. If the device power on timerstart automatically

cyclic timer m-2

timer runs on and off time continuously. If the device power on timerwant to start manual.

off delay timer

timer runs off time, after off time finished relay goes on. If thedevice power on timer start automatically

on delay timertimer runs on time, after off time finished relay goes off. If thedevice power on timer start automatically

note: in on delay and off delay timer ends, press start button torestart timer.

time and mode selectionthree settigs1. On time set2. Off time set3. Mode select

 

Additional Information:

• Item Code: SEES-1174
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

SEES Terminal Board for Arduino Mega 2560 R3

ARDUINO Mega 2560 R3 Proto Shield makes it easy for you to design custom circuits. SEES Mega 2560 R3 Proto Shield has extra connections for all of the Arduino I/O pins. It's a convenient way to make your custom circuit and Arduino into a single module.

SEES Mega 2560 R3 Proto Shield is designed to be compatible with Arduino Mega 2560 R3

Additional Information:

• Item Code: SEES-1173
• Port of Dispatch: Coimbatore
• Production Capacity: 1000
• Delivery Time: 2-3days
• Packaging Details: CARTON BOXES

IR Remote control is a combination of infrared transmitter and infrared receiver contains 4 relays and 1 Fan with Speed Control Through TRIAC which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operate the corresponding relay on the receiver board, Relay contact can control any equipment in Latch Mode (Toggles on each key press). Each relay has indicator LED showing current status.

The transmitter uses a modulated 40 kHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls. At the receiver end the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via ULN2803 which is an octal transistor array. 

Special Feature - Memory backup :

Memory backup Saves Last Condition of Relays if Power has gone with FAN Speed also. Custom Build Remote Control with Sleek match.

Features :

• Transmitter operating range up to 10 Meters visible distance.
• Compact 3V Battery Operated Transmitter.
• Receiver Indicates output status by LED.
• Receiver operates from 12V AC or DC power supply.
• Relay contact are brought out as Screw Terminals.

Applications :

• Burglar alarm system.
• Smoke and fire alarm system.
• Garage door controllers.
• Car door controllers.
• Security system.
• Other remote control systems.

Additional Information:

• Item Code: SEES-1180
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

IR Remote Control 8 Channel:

• Remote operating range up to Visible distance.
• Each relays can Switch On or OFF.
• Receiver Indicates output status by LED.
• Receiver operates from 12V AC or DC power supply.
• Relay contact are brought out as ScrewTerminal.
• Applications Garage door controllers, Home Automation and Robotics.

Additional Information:

• Item Code: SEES-1181
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

IR Remote Control 4 Channel:

• Remote operating range up to Visible distance
• Each relays can Switch On or OFF
• Receiver Indicates output status by LED
• Receiver operates from 12V AC or DC power supply
• Relay contact are brought out as ScrewTerminal
• Applications Garage door controllers, Car door controllers,Robotics

Additional Information:

• Item Code: SEES-1179
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

specification:

• ac input: 230v.
• bell output: 230v - 8a.
• light indication:
• first led: red- power light
• second led: green – manual mode indication, if manual mode disables auto bell will ring.
• third led: green – light indicates output is on

settings:

manual mode:

• press up button to bell ring

auto mode:

• we can set time slot and run automatically.
• to change auto mode into manual mode press down button.

programming mode:

 rtc time set

 delay time set

 slot-1 25 time settings

 slot-2 10 time settings

 

 day and slot select

applications:-

• school
• colleges 
•  industries

Additional Information:

• Item Code: SEES-1170
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Product Specification Product DescriptionDetails:

• 12 Inches Electric School Bell -Edison brand
  
  • Operating Voltage - 220V
  • Bell dia - 12 inches 

Additional Information:

• Item Code: SEES-1165
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Details:

• Bell dia : 12 inches (Rs:2,500.00)
• Bell dia : 9inches (Rs:2000.00)

Additional Information:

• Item Code: SEES-1167
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Digital Timer Description:

• PIC Microcontroller based timer Display in 7 Segment with PBT Switches.
• Delay Types - On Delay , Off Delay, On Off Cyclic, Off On Cyclic, NEW Impulse timer Added.
• Timing Adjustable from 1sec - 9999 sec and 1 Min - 9999 Min.
• Quick view option for delay type - timing press S2.

Additional Information:

• Item Code: SEES-80006

PIR Motion sensor switch

This pir motion sensor switch is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.

Function:

Detection fieldThe wide detection range is made up of up and down, left and right (see the following diagram), the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity.                                                .

Identify day and night automatically

The ambient light of ST09 could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.

Time-delay is added continually

When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).                                  .

Time-delay is adjustable

It can be set according to your desire, the minimum is 10sec±3sec,the maximum is 7min±2min.

Additional Information:

• Item Code: SEES-1191
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

Automatic Hand Sanitizer Machine for sale 1800 ml capacity.

• Automatic Hand Sanitizer Machine for sale 1.8 litre capacity. *Touch Free type *Drop Type *12 v DC Operated *Dispenses liquid *1800 ml capacities *compact Design *Easy to Refill *Machine includes dc adapter *1 Year warranty will be given Application: Suitable for offices,Banks, Industries, Houses, colleges,schools, hospitals,all applications it will be useful.

Application:
Suitable for offices,Banks, Industries, Houses, colleges,schools, hospitals,all applications it will be useful.

Additional Information:

• Item Code: SEES-4100
• Production Capacity: 1000 NOS
• Delivery Time: 2-3 DAYS
• Packaging Details: CARTOON BOXES

microcontroller based industrial counter- 6 digit:

a pulse counter could be roughly divided into three parts: a pulse source, an electronic device that counts, stores and prepares outputs, and a display to show the accumulated count. This pulse counter is based on microcontroller . Ttl-logic-compatible pulses generated by the source are fed to the counter for counting.

specification:

• power input: 12v dc (9v recommended)
• display: 16x2 lcd
• buttons: up, down, mode, set (or) start.
• relay: 230v 6a, 24v 8a
• sensor input: +5v to +30v

programming method:
press mode button to enter settings:display will show like thisincrement or decrement set count value with help of up and down buttonpress start button to change relay on or offrelay on: count value is reach set value relay will goes on condition. Relay off: count value is reach set value relay will goes off condition. Once your settings are finished press mode button to enable counter

 

Additional Information:

• Item Code: SEES-1626
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Coimbatore
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes

GSM BASED RELAY ON/OFF SWITCH  1 CHANNEL TO 4 CHANNEL

Remote control using a MOBILE phone from anywhere in the world!   - New Feature  - Schedule Timer Added 

                        The GSM BASED RELAY ON/OFF SWITCH 1 CHANNEL TO 4 CHANNEL  is a GSM remote control switch, it connects to the cell phone network and like a cell phone has its own cell phone number. The GSM switch is activated by Sending SMS to its cell phone number, it has 1 TO 4  independent relay switches with normally open and normally closed switch contacts, these can be programmed to switch on and Off By Sending SMS A1 B1 C1 -A0 B0 C0  .....     . SMS text message command. It can report the relay status by sending back a text message.

Applications 

                     Applications are endless and include the remote control of heating and air conditioning in holiday homes, lighting, engine pre-heaters, aviation engine heaters, irrigation systems, water well pumps, pumping stations, cabin heaters, power cycle and reboot of remote servers, routers and computers.

•    Dual band based GSM Modem.
•    Independent relays that can be programmed to switch on and OFF Using SMS.
•    secure access where it will only respond to programmed authorized telephone numbers.( upto 5 nos  ).
•    The relays can be temporarily switched on and Off by sending the GSM BASED RELAY ON/OFF SWITCH 1 CHANNEL TO 4 CHANNEL a text message command,
      a confirmation text will be returned when the relays turn on and off if required.
•    1 TO 4 relay's with normally open (N.O) and normally closed (N.C) contacts, maximum switching capacity is
     7 amps @ 230V ac per relay.

Specification

•    Operating Voltage - 12VAC/ DC 2 Amps
•    SIM card any Network -  LTE No support  - No support for JIO

SPECIFICATION :

• POWER INPUT: 12v DC-2 Amps
• RELAY: 250v 7A, 24 10A
• LIGHT INDICATION:
• FIRST LED: RED- POWER LIGHT
• SECOND LED: GREEN – BLINK 2 SECONDS ONCE GSM
• CONNECTED TO NETWORK
• RELAY ON CORRESPONDING LED WILL GLOW

Additional Information:

• Item Code: SEES-1176
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 Days
• Packaging Details: Carton Boxes