Sri Electronics & Embedded Solutions

Great Step-up Module with 0.9-5V input, output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie GoPro cameras)
You can supply it with single-cell LiPO or an AA size batter or others. Two AA batteries it can output current of 500 ~ 600MA, a single AA battery power supply can output 200ma current supply, great for mobile phones camera, single-chip, digital products supply.

Applications:

• USB voltage regulator for USB-powered device.
• This module will bring the USB voltage required for your application at regulated 5V output.
• Various USB devices need 5V from low voltage batteries.
• Charge mobile phone/MP4/MP3 from AA battery when traveling

Features:

• The module adopts a high-performance imported chip, performance is superior to the common module.
• Work with indicator light.
• Take the USB female, a wide range of Uses.
• A single AA battery power supply can output current up to 200~300 ma.
• Two AA batteries to the output current of 500~600 mA.
• Work from battery voltage as low as 0.9V, allowing you to maximize battery use.
• If your USB device is critical on 5V operation you can use this module.

KK 2.1.5 Multi-rotor LCD Flight Controller with MPU Best for Quadcopter, Firmware version: 1. 6: Pre-installed firmware., Dual copter, tricopter, y6*ATmega 644 pa, gyro/acc: 6050Mpu invensense inc, Auto-Level: Yes IC: ATmega 644 Pa, Gyro/Acc: 6050MPU Invensense Inc and Auto-Level: Yes Signal to ESC: 1520us*050 MPU system based. Signal from Receiver: 1520us (5 channels)Signal to ESC: 1520us Easy graphical interfacing with receiver. In Built firmware. Easy to use for beginners.And the Size is : 50.5mm x 50.5mm x 12mm Weight: 21 gram

The 74HC595 high speed shift register utilizes advanced silicon-gate CMOS technology. This device possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. This device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register.

Output Power: 5mW Wavelength: 650nm Working Voltage: 3v - 5V Laser Shape & Colour: Red Dot Working temperature: -10 „ƒ~‹40 „ƒ Housing material: Copper Dimensions: 6 * 18 mm(diameter*length) Outer diameter: 6mmOperating Current: <40mA.

3dbi Sticker Antenna GSM Antenna 1 Meter Wire Length SMA Male Connector
The 3dBi GSM Sticker Antenna with a 1-meter extension cable is designed to enhance mobile network performance, providing improved reception for GSM, 2G, 3G, and 4G signals. Its compact sticker design allows for easy installation, making it ideal for portable setups or devices that require signal enhancement in environments with limited space.

Operating voltage: 2.5V~5.5V. Minimal external componentsy. No external filter is required. Low standby current (on power down mode). Excellent performance

It is high quality & reliable breadboard jumper cable, which is used in many applications for experimental purpose & learning boards

The LM7809 voltage regulator provides 9V Positive voltage as output and can provide local on-card regulation, eliminating the distribution problems associated with single-point regulation.*Internal short-circuit current limiting, Output current up to 1.5 A, High power-dissipation capability, Output current up to 1.5 A

This Voice microphone is Multi-Channel and is suitable for mobile phones, telephones, tape recorders, voice-activated toys, computers, and other products. The sensitivity is in accordance with the IEC standard, and the sensitivity of "pa" is increased by 20dB,

Driver Voltage is 5V/9V/12V Acc. to Stepper Motor*Direct plug, easy to use stepper motor used in the development board*Supported by Raspberry Pi, STM, ARM, DSP, AVR, PIC, 8051.

A 5mm Red LED (Light Emitting Diode) is a type of diode that emits red light when an electric current passes through it. These LEDs are widely used in a variety of applications, from indicator lights and status indicators to decorative lighting in electronic projects. A pack of 100 typically refers to a bulk purchase of these LEDs, which is cost-effective for hobbyists, engineers, or manufacturers needing to stock up for projects.

We are offering a wide range of products to our clients.    
The IR Transmitter and Receiver LED Pair, commonly referred to as an IR LED pair, is a fundamental component in various electronic applications such as remote controls, proximity sensors, and line-following robots. These pairs typically operate at wavelengths around 940 nm, which is optimal for most IR communication and sensing tasks.

The 330 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide

The Atmel ATmega8 28-Pin DIP IC is a popular 8-bit microcontroller from Atmel (now part of Microchip Technology) that is commonly used in various embedded systems, DIY projects, robotics, and electronics. It belongs to the ATmega family of microcontrollers, known for their flexibility, ease of use, and wide availability. 

The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 32KB ISP flash memory with read-while-write capabilities, 1KB EEPROM, 2KB SRAM, 54/69 general purpose I/O lines, 32 general purpose working registers, a JTAG interface for boundary-scan and on-chip debugging/programming, three flexible timer/counters with compare modes, internal and external interrupts,serial programmable USART, a universal serial interface (USI) with start condition detector, an 8-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, SPI serial port, and five software selectable power saving modes. The device operates between 1.8-5.5 voltStrictly NON RETURN AND REFUND (out look colour may vary Functionality and features are same)Delson Electronics Are Specialise In Industrial Electronic Components ,Electronic Spare Parts ,Sensors ,Modules, Kits, Project Items Materials, Raw Materials, Security Products Security Alarm System, Fire Alarm Systems.

The TSOP1738, TSOP1838, and TSOP0038 are compact infrared (IR) receiver modules designed to detect 38 kHz modulated IR signals, commonly used in remote control systems for televisions, air conditioners, and other consumer electronics. These modules are known for their high sensitivity, low power consumption, and immunity to ambient light interference.

The PIC16F877A is a versatile 8-bit microcontroller from Microchip Technology, renowned for its reliability and ease of use in embedded systems. With a rich set of features, it serves as an excellent choice for both beginners and experienced developers in applications ranging from industrial automation to robotics and consumer electronics.

The package contains 3 types of IC from 78XX Family. These are L7805, L7809, L7812 IC. In this package, you will get 15 pics IC, (5 pieces each type of IC)*The xx in 78xx indicates the fixed output voltage it is designed to provide.

Specifications: 5mm common cathode rgb color: transparent gel, full color light emitting red, green and blue red: wave length 630 640 nm; brightness 1000 1200 mcd; voltage: 1. 8 2. 0V green: wave length 515 525nm; brightness 3000 5000mcd; voltage: 3. 2 3. 4V blue: wave length 465 475nm; brightness: 2000 3000mcd; voltage: 3. 2 3. 4V.
Resistance is a current limiting source and a very basic need when we work in field of electronics

Introduction a light-emitting diode (led) is a two-lead semiconductor light source. It is a pn-junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor.

Peak repetitive Reverse voltage is 1000V*Power dissipation 3W
The component you're referring to is the 1N4007 General-Purpose Rectifier Diode, widely utilized in electronic circuits for converting alternating current (AC) to direct current (DC). Its specifications of a Peak Repetitive Reverse Voltage (PRV) of 1000V and Power Dissipation of 3W make it suitable for high-voltage applications.

This switch can also be used to control the direction for a DC Motor.
The DPDT (Double Pole Double Throw) 6-Pin Slide Switch is a versatile component widely used in electronic circuits for switching applications. Its ability to control two separate circuits simultaneously makes it ideal for various projects, including motor control, signal routing, and mode selection.

Peak repetitive Reverse voltage is 1000V*Power dissipation 3W
The 1N4007 Diode is a widely used general-purpose silicon rectifier diode, ideal for converting alternating current (AC) to direct current (DC) in various electronic applications. It is known for its high reverse voltage tolerance and reliable performance in power supply circuits.

MNP: 1.5 Y Brand: BOYU Secure electrical connections Rated for 1A AC/DC current and 50V AC/DC voltage Low contact resistance (20mΩ max) High insulation resistance (500MΩ min) Withstands voltage fluctuations (500V AC/minute) Wide temperature range: -40°C to +85°C

MPN: WD100EW-04 Brand: Wenda Connectors Connector Type: Female Housing Connector Pitch: 1mm No.of pins: 4 pin Insulation Impedance: 10 Mohm DC 300 V Wire Length: 300mm Wire Gauge: 30 AWG

MPN: XH-Y Brand: Boyu Rated current: 3A AC,DC Rated Voltage: 250 V AC,DC Temperature range: -25 to 85 degc Gender: Female No.of pins: 5

Rated voltage: 300V. Rated current: 16A. Wire range: 22-14AWG 2.5 square mm. Strip length: 4.5-5mm.
Key Specifications

• Rated Voltage: 300V

• Rated Current: 16A

• Wire Range: 22–14 AWG (up to 2.5 mm²)

• Strip Length: 4.5–5 mm

• Pitch: 5.08 mm

• Material: Polybutylene Terephthalate (PBT) housing with tin-plated brass pin headers and nickel-plated brass contacts

• Mounting Type: PCB mount with screw terminals

This is 10 Pin JST Cable Connector Female or JST XH. For Led Lights and DIY Projects. Connector
The 10-Pin JST XH Female Cable Connector with a 2.54mm pitch is a versatile and reliable solution for connecting electronic components in various applications. Its standardized design ensures compatibility with a wide range of devices, making it a staple in both professional and DIY electronics projects.

Voltage Rating: 250V Connector Type: Header Contact Type: Male Pin JST-XH 16 Pin Connector (16 Pin Male Relimate Polarized Connector)

Voltage Rating: 250V Connector Type: Header Contact Type: Male Pin JST-XH 6 Pin Connector (6 Pin Male Relimate Polarized Connector)

The HA-04Y-2.5mm 4-Pin Female Buckle Housing Connector with 300mm Wire (30 AWG) is a compact and reliable wire-to-wire connector assembly, ideal for various electronic applications requiring secure and space-efficient connections.

MPN:WT100E0-02H93-0W BRAND:Wenda Connectors No. of Pins:2
These connectors are suitable for various applications, including consumer electronics, DIY projects, industrial equipment, and automotive systems. When selecting a connector, consider factors like wire length, current and voltage ratings, and the specific needs of your application.

MPN:PHB-4Y BRAND:Wenda Connectors No. of Pins:4
Key Specifications

• Connector Type: PHB-4Y Female Housing

• Pin Configuration: 4-pin, double-row

• Pitch (Pin Spacing): 2.00 mm

• Wire Length: 300 mm

• Wire Gauge: 28 AWG

• Rated Voltage: 250V AC/DC

• Rated Current: 2A

• Contact Resistance: ≤20 mΩ

• Insulation Resistance: ≥1000 MΩ

• Withstand Voltage: 800V AC/minute

• Operating Temperature Range: -25°C to +85°C

• Housing Material: Nylon UL94-V0

• Terminal Material: Tin-plated phosphor bronze

The A1251-05Y-1.25mm 5-Pin Female Housing Connector with 300mm Wire (30 AWG) is a compact and reliable wire-to-board solution, ideal for applications requiring secure and space-efficient connections.

These connectors are suitable for various applications, including consumer electronics, DIY projects, industrial equipment, and automotive systems. When selecting a connector, consider factors like wire length, current and voltage ratings, and the specific needs of your application.

We are offering a wide range of products to our clients. 

NTC Thermistor is one of the most commonly used temperature sensors. In an NTC the resistance value decreases as the temperature increases.

NTC 10K can be applied to air conditioner devices, heating devices, clinical thermometer, auto - electron, electronic calendar, and so on.         

We are offering a wide range of products to our clients.      
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field.

This is a PIR detection-based Infrared Motion Sensor this switch can detect the human body's infrared, and use it to control the load. The PIR has adjustable time delay according to actual needs.
Specification:Type PIR Switch
Available Fixed Time Delay 15 Sec, 45 Sec, and 5 Min.
Colour White
Working Voltage AC110-240V
Working Frequency 50/60Hz
Output Power ≥40W
Photosensing Setting ≤2Lux, ≤25Lux, 2000Lux
Sensing Distance 4-6m
Angle Coverage 110 degrees
Standby Power Consumption <0.1W
Fitting Diameter 40 mm

Extremely low supply current: typically 9 μA per comparator Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely low input bias current: 1 pA typical

Compatible with MCS-51 Products 4.0V to 5.5V Operating Range 32 Programmable I/O Lines 256 x 8-bit Internal RAM Flexible ISP Programming (Byte and Page Mode)