Peelamedu, Coimbatore, Tamil Nadu
GST No. 33EFBPS6615K1Z7
Call 08046050927 61% Response Rate
We are enlisted amongst the top names in the industry engaged in providing a quality approved range of RFID Readers and Cards. These are available in different sizes, specifications and are very reliable.
Minimum Order Quantity: 1 Piece
Product Brochure
Type Of Reader | Fingerprint Scanner |
Operating Temperature | -40 to 0 Degree Celsius |
Power Supply | 3-6V |
Reading Range | 50 - 100 mm |
Identification Time | <300 ms |
Memory Capacity | 128 MB |
Details:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | SEES |
Model Name/Number | RC522-AN |
Type Of Reader | Card Reader |
Interfaces | SPI |
Connectivity Type | Wireless |
Operating Temperature | -20-80 degrees Celsius |
Power Supply | 3-6V |
Reading Range | 50 - 100 mm |
Scan Speed | 0-100 Scans/sec |
Data Transfer Rate | Maximum 10 Mbit/s |
Operating Current | 13-26 mA / DC 3.3 V |
Idle Current | 10-13 mA / DC 3.3 V |
Sleep Current | <80 uA |
Peak Current | <30 mA |
Operating Frequency | 13.56 MHz |
Read Range | 0 to 60mm (mifare1 card) |
Support Card Type | Mifare1 S50,mifare1 S70 MIFARE Ultralight,mifare Pro,MIFARE DESFire |
Physical Dimension | 40 x 60 mm |
Storage Temperature | -40-85 degrees Celsius |
Humidity | 5% -95% Relative Humidity |
Reading Distance | More Than 7.5 cm |
This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.
It uses the advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deal with ISO14443A frames and error correction.
This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance.
Features :1 x RFID-RC522 Reader/Write Module
1 x Standard blank RFID card
2 x A Straight & right-angle header strip
1 x Special-shaped keychain RFID tag
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | EM-18 RFID |
Current | < 50mA |
Size | 32mm(length) x 32mm(width) x 8mm(height) |
Operation Voltage | 5 VDC |
Data Baud Rate | 9600 bps |
Operating Frequency | 125 Khz |
Read Distance | 10 cm |
EM-18 RFID READER
This module directly connects to any microcontroller UART or through a RS232 converter to PC.It gives UART/Wiegand26 output. This RFID Reader Module works with any 125 KHz RFID tags.
Specifications:
RS232 interface format
Hence number on the card is 0012964329.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Working Temperature | 10 to 70 degree Centigrade |
Dimensions | 15 x 12 x 3.5 cm |
Working Voltage | DC 12 V |
Unlock current | Static Current Memory 250 Standard Users |
Card Read Distance | 0-10 cm |
RF Type | EM Card |
Wide rel. humdity range | 10 to 90 % RH |
Item Weight | About 200 gm |
Secure and effective RFID Door access controller, perfect for secure key-less entry to your home or office
Features:
Package contents:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Packaging Type | Box |
Size | 85 x 55 x 0.8 mm |
Frequency | 125 KHz |
Material | PVC |
Color | White |
Temperature | 40 to 85 deg C |
This is a basic RFID tag used for presence sensing, Aceess Control etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable. Card is blank, smooth, and mildly flexible.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Packaging Type | Box |
Size | 85 x 55 x 0.8 mm |
Frequency | 125 KHz |
Material | PVC |
Shape | Rectangular |
Color | White |
Temperature | 40 to 85 degC |
Thickness | 0.5-2 mm |
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
The MIFARE Classic card is fundamentally just a memory storage device, where the memory is divided into segments and blocks with simple security mechanisms for access control. They are ASIC based and have limited computational power. Thanks to their reliability and low cost, these tags are widely used for electronic wallet, access control, corporate ID cards, transportation or stadium ticketing.
Description :
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
The MIFARE Classic card is fundamentally just a memory storage device, where the memory is divided into segments and blocks with simple security mechanisms for access control. They are ASIC based and have limited computational power. Thanks to their reliability and low cost, these tags are widely used for electronic wallet, access control, corporate ID cards, transportation or stadium ticketing.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Dimension/Size | 98.0 mm (L) x 65.0 mm (W) x 12.8 mm (H) |
Connectivity Type | Wired |
Operating Temperature | +45 to +70 Degree Celcius |
Material | PVC, PET, ABS |
Power Source | USB BUS Power |
As basic function, this module could read and write RFID card. Various cards could be supported. We've taken our popular PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Size | 8.6 X 5.40 X 0.19 cm |
Type | Active RFID |
Frequency | 125 khz |
Material | Plastic |
Shape | Rectangular |
Use | Office / College, Exhibition, Event |
Packaging Type | Box |
This is 125KHz RFID Card used for Contactless transmission of data and supplies energy with no battery needed. Its Operating distance is Up to 100mm depending on antenna geometry. Operating frequency is 125KHz and Data transfer speed is 106 kbit/s.
It is featured with Data integrity of 16 Bit CRC, parity, bit coding bit counting which allows Anti collision. These cards are typically used in ticketing transaction: <100 ms including backup management.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Frequency | 13.56 MHz |
Size | Small |
Model Name/Number | 125KHz & 13.56MHz RFID IC Keychain Tag |
Material | PVC |
Dimension | 40x33x4 mm (+/- 0.5mm) |
Read Distance | Up to 10 cm |
Operating Temperature | -20 degree C to +75 degree C |
This is 13.56MHz and 125 khz RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications.
Operating on a frequency of 13.56MHz and 125 khz , these tokens are all pre-programmed with unique ID numbers to communicate wirelessly with RFID Readers over distances of around 1 Meter or less. This means you can attach it to vehicles or items, keyrings or even pets’ collars to keep track of the location via an array of readers in the office, warehouse or home.
Each RFID Tag comes attached to a small keyring, within a little blue housing. This 13.56MHz and 125 khz .
This basic RFID tag works in the 13.56MHz RF range and comes with a unique 32-bit ID. It is not re-programmable. This blank, smooth, and mildly flexible RFID tag is ready for your logo (or hand-drawn scribble).
Designed for the RFID 13.56MHz and 125 khz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
Note: Color of the tag will be ship randomly depending upon the availability.Additional Information:
View Complete details