Sri Electronics & Embedded Solutions

In 3S 10A 12V 18650 Lithium Battery Charger Board Protection Module, 3S stands for 3 18650 batteries or polymer lithium battery series combination. With 10.8V rated voltage for polymer battery, 11.1V 18650 or 3.7V lithium battery rated voltage and 12.6V lithium battery can be charged. And discharge 10A (referring to the maximum discharge current limit) Lithium battery protection board it also Comes with over-charge, over-discharge, over-current, short circuit protection.

 

Formula expansion :

1C battery expansion, 2000 capacity is equal to 2AH x 1 = 2A upper limit of current.
3C battery expansion, 2000 capacity equal to 2AH x 3 = 6A upper operating current.

If the battery gets heated, does not apply that battery, such a situation cannot be long-term use, the battery will soon be damaged.

 

Notes :

1: strictly according to the drawing wiring 0 V (B), 3.7 V (B1), 7.4 V (B2), 11.1 V (B +), not intentionally short circuit!
2: Once you have charged the first line, it will have output.
3: When connecting three battery groups, please make sure that the voltage of each battery group, if not the same, fill each battery separately and then use it in series. discharge test, the fastest battery voltage drop, which group is low battery. (2 good battery + a use effect = 3 low battery low battery use effect).

 

Warning:

The protection board can not be used for lithium iron phosphate batteries, lamp hernia, hand drill battery, electric battery fish, electric bicycle battery, car battery for children, 775 (4A) motor, 1 W fish eye LED light, please pay attention customer purchase connection! Described in terms of power for the following products: Massager rechargeable battery, LED ready light power supply, 12 V electronic products, solar street lamp battery, power backup monitor, and other products.

 

Features:

1. Operating current : 6 8A
2. Current limit : 10 13A
3. Storage condition : -40 +80 ℃
4. Resting current: less than 30uA
5. Effective lifetime: over 30,000 hours
6. Internal resistance: less than 100mΩ
7. Short-circuit protection: protection
8. Self-recovery delay

Package Includes :

1 x 3S 10A 12V 18650 Lithium Battery Charger Board Protection Module.

 

Additional Information:

• Item Code: SEES187
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 DAYS
• Packaging Details: CARTOON BOXES

High capacity, small size, light weight, can be charged/Discharged using same wire any of two Meets to all safety norms for handling, can be used as UPS for CCTV camera DVR etc.*Spare or replacement part for drones, GPS, MP4 player, iPod, DVD, mobiles backup power supply, power bank, tablet PC and other device and durable in use, easy to install. Voltage: 12 volts. Battery size: 65 x 55 x 20 mm. Application: small drones, GPS, MP4 player, iPod, DVD, mobiles backup power supply, power bank, tablet PC*11.1V & 2200maAH is the capacity of 3 Cell Battery

Additional Information:

• Item Code: SEES-5976
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

Battery Type: Lithium-Ion Battery High performance and capacity
18650 Li-ion battery is a lithium-ion rechargeable battery and is used in high drain applications due to its superior capacity and discharge rate. The first 4 digits of 18650 indicate its dimension, i.e. 18mmx65mm, and the last 5th digit indicates its shape, i.e. cylindrical. Li-ion batteries can usually boost a 300-500 charge cycle.

Additional Information:

• Item Code: SEES-5977
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

The single universal battery charger for 3.7 V 18650 16340 14500 li-ion AA AAA rechargeable batteries, which is designed to charge your batteries quickly and safely with an auto-stop charging feature mini li-ion charger has an EU/US plug, but the input mains supply is universal AC 100-240V, 47-63Hz.

Additional Information:

• Item Code: SEES-5980
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

The 1800 mAh ICR18650 3.7V Lithium-Ion Battery is a type of rechargeable battery commonly used in various electronic devices, such as flashlights, power tools, and portable electronics. 

Additional Information:

• Item Code: SEES-5978
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

Battery Brand: ZOP Power
Capacity: 5000mAh
Size: 25*48*155mm
Continuous Discharge Rate: 60C
Weight: About 404g
Note: Due to the difference between the measurement, the battery dimension and weight may have little error.

Caution
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.

Additional Information:

• Item Code: SEES-5971
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

ZOP Power 3500 mAh 3S Lipo Battery – your reliable power source for various electronic gadgets. This battery is popular among remote control fans and drone flyers due to its convenience and good performance

Additional Information:

• Item Code: SEES-5972
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

Three series of lithium battery protection board. Automatically cancel protection after protection conditions restore. Suitable for lithium battery pack of 11.1V, 12V, 12.6V. Quiescent current < 30uA, so power consumption is small. With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.

Additional Information:

• Item Code: SEES-5973
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

ZOP Power 5500 mAh 3S Lipo Battery – your reliable power source for various electronic gadgets. This battery is popular among remote control fans and drone flyers due to its convenience and good performance

Additional Information:

• Item Code: SEES-5974
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

9V Hi-Watt Battery, This battery is a high capacity & low cost solution for many electronic devices. It is used with its specific battery snap, The battery clip can be used to power LED's or other devices with a 9V battery.*It is Used For Electronic Toys, Clocks, Walkie-Talkies, Smoke Alarms, Handheld Test Equipment, Digital Instruments, Transistor Radios & General Purpose

Additional Information:

• Item Code: SEES-5979
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

Colour Display Reverse Connection Protection Wide Variety of application Category: Lipo Voltage Checker Tags: Battery Indicator Capacity Indicator Module Digital Battery Indicator Digital Battery Module Lipo Battery

Additional Information:

• Item Code: SEES-5981
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board (BMS) ensures the security of battery pack. This battery management system design and Suitable for: 10.8V (Rated voltage of polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (Lithium battery full charge voltage)

Note: Please allow 1-3mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

Also, Note down and take care of following things while using 3S 11.1V 18650 Lithium battery protection board 12V 10A Overcharge And Overcurrent protection.

1. Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C.
2. Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current.
3. 3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6A maximum working current.
4. When the battery in series 3, please ensure that the voltage of each battery is the same, if not the same, please fill in each set of batteries and then use When the discharge is tested, the battery in which the voltage drop is the fastest is the difference between the battery and the battery.
5. After the line is connected to the need to charge (charge voltage 12.6V) activation, there will be output.
6. 3A current above the discharge products, the battery discharge rate to 3C or more.Formula: 1C ratio of the battery, the 2000 capacity is equal to the maximum operating current 2AH*1=2A.3C ratio of the battery, the 2000 capacity is equal to the maximum working current 2AH*3=6A.in the use of the battery will be the battery power is not applicable, this situation must not be used for a long time, the battery will soon be damaged. Description interpretation.
7. 3 Series (series combination of 18650 3 batteries or lithium polymer batteries)
8. 10.8V (polymer battery rated voltage)
9. 11.1V (18650 or 3.7V lithium battery rated voltage)
10. 12.6V (lithium battery voltage)In the process of use, if the battery heat, the battery power is not applicable. This situation cannot be used for a long time. Otherwise, the battery will soon be damaged.

Features:

1. Three series of lithium battery protection board.
2. Automatically cancel protection after protection conditions restore.
3. With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
4. Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
5. Quiescent current < 30uA, so power consumption is small.

Package Includes:

1 x 3S 11.1V 18650 Lithium battery protection board- Good Quality.

Additional Information:

• Item Code: SEES183
• Production Capacity: 1000 NOS
• Delivery Time: 1-2 DAYS
• Packaging Details: CARTOON BOXES