View Mobile No.

our range

MSP430 and RENESES Development Boards

Being the leading names in the industry we are involved in providing a wide range of Texas-MSP430 and Reneses Development Boards. Our product is available in various sizes and specifications as per the client requirement.

  • KIT-RL78 Renesas Starter
  • KIT-RL78 Renesas Starter
  • KIT-RL78 Renesas Starter
KIT-RL78 Renesas Starter

KIT-RL78 Renesas Starter

Rs 1,300  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Model Name/NumberKIT-RL78
BrandSEES
ColorGreen
Packaging TypeBox
Voltage230 V
Frequency50 Hz

Renesas Starter Kit for RL78 Target Devices - RL78/G12 - 16-Bit Single-Chip Microcontrollers


Features:

  • General-purpose register: 8 bits × 32 registers (8 bits × 8 registers × 4 banks)
  • ROM: 2 KB to 16 KB, RAM: 256 bytes to 2 KB, data flash memory: ?/2 KB
  • High speed on-chip oscillator : 24/16/12/8/4/1 MHz(TYP) can be selected
  • On-chip single-power-supply flash memory (with prohibition of block erase/writing function)
  • Self-programming
  • On-chip debug function
  • On-chip power-on-reset (POR) circuit and voltage detector (LVD)
  • On-chip watchdog timer (operable with the dedicated low speed on-chip oscillator clock)
  • On-chip key interrupt function
  • On-chip clock output/buzzer output controller
  • On-chip BCD adjustment
  • I/O ports: 18/22/26 (N-ch open drain: 2)


Timer:

  • 16-bit timer: 4/8 channels
  • Watchdog timer: 1 channel
  • 12-bit Interval timer: 1 channel


Serial interface:

  • CSI: 1/2/3 channel
  • UART: 1/3 channel
  • Simplified I2C: 0/2/3 channel


Product Overview

The Renesas Starter Kit for RL78 is intended as a user-friendly introductory and evaluation tool for the RL78/G12 - microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and Flashing , using High-performance Embedded Workshop as well as programming the device using Flash Development Toolkit.


The Renesas Starter Kit for may be connected to the host PC using a simple RS232 serial connection (not normally fitted) or via the included USB interface CP2102 USB to uart converter Chip Included on the Board.


The purpose of the board is to enable the user to evaluate the capabilities of the device and its peripherals by giving the user a simple platform on which code can be run only minutes from opening box. It can also prove an invaluable tool in development by providing a useful test platform for code already debugged using one of our more powerful emulation tools.


NSK Starter Kit Features
MAIN Features

  • USB Powered
  • RS232 Tx, Rx interface with MAX232 IC on socket
  • Quartz crystal 20.000Mhz
  • Reset button
  • Power plug-in jack
  • Extension slot on every uC pin
  • GND bus
  • Vcc bus
  • Four mounting holes 3,3 mm (0,13")


Package Content

  • Renesas Development Board ( WITH CHIPS RS232,RTC1307,24c02 ,LCD 16X2).
  • USB cable.
  • Software CD( Renesas IDE,Flash Tool kit,Datasheets).


Additional Information:

  • Item Code: SEES-1121
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 Days
  • Packaging Details: Carton Boxes

View Complete details

get quoterequest a call back
  • MSP JTAG
MSP JTAG

MSP JTAG

Rs 450  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

MaterialPVC
Model Name/NumberMSP430F
Dimensions50x40 mm (2x1.6") + 20 cm (8") cable.
Frequency50 Hz
Power10 A
Power SourceElectric
UsageElectronic Instrument

Features:

  • Program all MSP430Fxxx flash microcontrollers (note: parallel port JTAGdoesn't support Spy-Bi-Wire devices as timing from parallel port can't meet programming specs)
  • Uses TI standard 2x7 pin JTAG connector
  • No need for external power supply, all power is taken from the LPT port
  • Compatible with IAR Kick-start software for programming, real time emulation, debugging, step by step program execution, breakpoints, memory dumpetc everything all high priced emulators do
  • With IAR Kick start you can write in assembler unlimited code size andto write in C with 2K limit for all MSP430 microcontrollers
  • Works with free GCC C compiler and Insight MSP430 tool chain and debugger


Additional Information:

  • Item Code: SEES-20038

View Complete details

get quoterequest a call back
  • KIT-R8C Renesas Starter
KIT-R8C Renesas Starter

KIT-R8C Renesas Starter

Rs 1,300  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Model Name/NumberKIT-R8C
BrandSEES
Voltage230 V
Frequency50 Hz
Packaging TypeBox

Renesas Starter Kit for R8C/27
Target Devices - R8C/27 Group
Device Part No.populated on the board: R5F21276SNFP (R8C/27 Group)

The R8C/27 is based on the R8C CPU Core. Maximum operating frequency is 20 MHz. A Flash Memory Version is available. Internal Flash Memory is programmable on a single power source.


Key Features:

  • 8-bit Multifunction Timer with 8-bit prescaler (Timer RA and RB): 2 channels
  • Input Capture/Output Compare Timer (Timer RC): 16-bit x 1 channel
  • Real-Time Clock Timer with compare match function (Timer RE): 1 channel
  • UART/Clock Synchronous Serial Interface: 2 channels
  • I2C-bus Interface (IIC)/Chip-select Clock Synchronous Serial Interface: 1 channel
  • LIN Module: 1 channel (Timer RA, UART0)
  • 10-bit A/D Converter: 12 channels
  • Watchdog Timer
  • Clock Generation Circuits: XIN Clock Generation Circuit, On-chip OscillatorXCIN Clock Generation Circuit
  • Oscillation Stop Detection Function
  • Voltage Detection Circuit
  • Power-On Reset Circuit
  • I/O Ports: 25 (incl. LED drive ports)
  • External Interrupt Pins: 7


The Renesas Starter Kit for R8C/27 is intended as a user-friendly introductory and evaluation tool for the R8C/27 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and Flashing , using High-performance Embedded Workshop as well as programming the device using Flash Development Toolkit.


The purpose of the board is to enable the user to evaluate the capabilities of the device and its peripherals by giving the user a simple platform on which code can be run only minutes from opening box. It can also prove an invaluable tool in development by providing a useful test platform for code already debugged using one of our more powerful emulation tools.


NSK Starter Kit Features:

  • USB Powered
  • RS232 Tx, Rx interface with MAX232 IC on socket
  • Quartz crystall 20.000Mhz
  • Reset button
  • Power plug-in jack
  • Extension slot on every uC pin
  • GND bus
  • Vcc bus.
  • Four mounting holes 3,3 mm (0,13")

 


I/O Features:

  • R5F21276SNFP SMD Chip
  • On board Regulated Power Supply 5v,12v supplys
  • Easy to test with Burg Connecters wires
  • A Serial Port for ISP Programming Through Flash Development Tool Kit
  • An 2 RS232 Serial Port
  • LCD Display
  • DC Power Supply Connector(12v Ac or Dc)
  • 24Cxx I2C EEPROM

 



Additional Information:

  • Item Code: SEES-1122
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 Days
  • Packaging Details: Carton Boxes

View Complete details

get quoterequest a call back
  • MSP 430F133 Breakout Board
MSP 430F133 Breakout Board

MSP 430F133 Breakout Board

Rs 500  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Model Name/NumberMSP 430F133
BrandSEES
Voltage230 V
Frequency50 Hz
ApplicationElectronic

Features:

  • Ready to use Breakout Board for MSP 430 F133 mounted.
  • On board Regulated Power Supply.
  • JTAG programming Connecter.
  • I/O Pins connected to Burg Stick.
  • Test Switch Connected to P1.0.
  • Test Led connect port 1.
  • By Default SMD chip MSP430 F133.


Additional Information:

  • Item Code: SEES-1116
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 Days
  • Packaging Details: Carton Boxes

View Complete details

get quoterequest a call back
  • MSP 430DEV Board
MSP 430DEV Board

MSP 430DEV Board

Price on Request
Minimum Order Quantity1 Piece
Model Name/NumberMSP 430DEV
BrandSEES
Voltage12 V
ApplicationElectronic
MCUMSP430F133 with 8K Bytes

Features:

  • Program Flash, 256 Bytes data Flash, 256 Bytes RAM
  • 7-Segment LED Display(Multiplexed x4)
  • A Serial Port for ISP
  • An RS232 Serial Port
  • On Board JTAG for Debugging
  • DC Power Supply Connector(12v Ac or Dc)
  • LCD display 2linex16 Character
  • 24Cxx I2C EEPROM
  • 1 LED array
  • Matrix Key Pad
  • 4 Intruupt Switches
  • Buzzer
  • Eaxample Programs for LED, ADC, LCD, UART, INT SW

Package Content
  • MSP 430 Development Board.
  • LPT Port JTAG For programming & debugging.
  • Software CD.

 



Additional Information:

  • Item Code: SEES-1115
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back
  • MSP430 Launchpad Value Line Development Kit
MSP430 Launchpad Value Line Development Kit

MSP430 Launchpad Value Line Development Kit

Price on Request
Minimum Order Quantity1 Piece
Model Name/NumberMSP430
BrandSEES
Voltage230 V
MaterialPVC
Frequency50 Hz

What is Launch Pad LaunchPad is an easy-to-use development tool intended for beginners and experienced users alike for creating microcontroller-based applications. the LaunchPad offers everything you need to get started with your projects.



Additional Information:

  • Item Code: SEES-1117
  • Production Capacity: 1000 NOS
  • Delivery Time: 1-2 DAYS
  • Packaging Details: CARTON BOXES

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES